Hawkeye 1700 PC EPO Aeroplano FPV 1700mm PNF
2021-09-08
Categorias:
Modelo: Jandra Tangzong - HPK107000216-0
Hawkeye 1700 Pc Epo Aeroplano Fpv 1700mm Pnf
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
..||..
Become part of the landscape as you patrol the skies with the Hawkeye 1700 Polycarbonate covered FPV plane. The molded EPO foam airframe is designed with versatility and easy transport in mind. The whole airframe breaks down in to incredibly small components for easy transport. The two piece wing panels are hinged in the middle so each panel folds in half. The aluminum tail boom slips into a collet style fitting on the fuselage. Thumbscrews for the wing joiner and hold down bolts mean the whole airframe can be broken down or assembled in minutes without any tools, great for remote field work.
Speaking of fuselage, since this plane was designed to carry an assortment of FPV and other equipment, easy fuselage access was paramount. In addition to the removable front canopy, you can reach the deep bowls of the fuselage with the hinged side door. As the airplane is plug and fly, you can be flying in literally minutes. Keeping on the theme of rugged, the airframe is a pusher configuration to protect the motor and prop, the servos are of the metal gear variety, and the included hardware is up for the task. The afore mentioned canopy is held in place with a very positive spring loaded latch which captures the hatch base, and the hinged clear canopy section which gives you easy access for your camera equipment.
So if you're looking for a rugged, easy assembling plane for FPV, look no further than the Hawkeye 1700 polycarbonate coated Camouflage FPV plane.
Features:
• Plug and fly - install your choice of receiver and battery
• Molded EPO airframe covered in durable camouflage polycarbonate
• Fully bolt together airframe uses no tools
• Molded EPO foam wing and tail
• Bolt together construction, no glued required
• Removable battery hatch and hinged side access fuselage door
• Easy hinged clear canopy for quick access to FPV equipment
• 2 piece wing panels are both hinged to fold even smaller
• Quick release collet style tail boom holder
Specs:
Wingspan: 1700mm
Length: 1233mm
Weight: 2300g
Servos: 4 x 9g metal gear
ESC: 40 amp brushless
Motor: 3536 1000kv Outrunner
Requires:
4 Channel Transmitter and Receiver
4S 14.8V 4000+mAh Lipoly battery
*COSTOS DE ENVIO:
Usted puede recojer su producto en Nuestras Oficinas SIN COSTO alguno, o bien puede seleccionar cualquiera de las siguientes opciones :
| METODO | COSTO | PRODUCTO ADICIONAL |
| Estafeta Zona Metropolitana | 705 m.n. | 207 m.n. |
| Redpack Zona Metropolitana | 705 m.n. | 207 m.n. |
| Estafeta Interior de la Republica | 830 m.n. | 207 m.n. |
| Redpack Interior de la Republica | 830 m.n. | 207 m.n. |
| Extra Urgente (DHL-FEDEX-UPS Internacional *aprox 4-6 Dias Hab.) | 3152 m.n. | 995 m.n. |
|
Nota al calce... |
|
El nombre Comercial Jandra Tangzong® asi como tambien sus Logotipos son marcas comerciales registradas que pertenecen a su respectivos propietarios Jandra Tangzong Corporation y sus filiales. El uso publicitario de una marca ajena por un tercero, se admite siempre y cuando dicho uso no afecte al fin distintivo de la marca utilizada y, no se aprecie un riesgo de confusion y aprovechamiento de la reputacion generada. La Doctrina y Jurisprudencia comunitaria de la Organizacion Mundial de la Propiedad Intelectual OMPI han establecido una serie de requisitos para la legal utilizacion de una marca ajena en publicidad comparativa. |
