MrRC Sound V4.1 Juego Sonido Speakerless
Modelo: MrRC - HPK614000001-0
Mrrc Sound V4.1 Juego De Sonido Speakerless
Have you ever wanted to add real engine sounds to your radio control airplane or ground vehicle? Have you ever wanted that next step in realism for RC aircraft, car or truck? The MrRC Sound Module will give you that extra something at a price you can afford. Made in the USA by MrRC Sound.
Here is how it works. The module connects to the 2.4GHz receiver throttle channel on one end, and the ESC on the other. The card is all self contained and includes the sound modules as well as the amplifier. The V4.1 board has 6 engine sounds on it for the aircraft version, yes, 6 different engine sounds, 8 for the ground version! Plus auxiliary sounds such as guns, bombs, sirens, and pilot call outs. Additional sound packs are available for a large range of engine sounds. Even if there is no exact match for your plane or ground vehicle, more than likely one of the sounds will be close and sound good.
The engine sound on the Version 4.1 is easily changed between the sounds with a simple push button on the board!
The engine sounds are a high quality recording, with start up and shut down sounds for each engine. All sounds respond to the throttle input. For example, with the airplane motor off, open the throttle a crack, the motor comes to life at the same time a starting sound plays, and goes into an idle. The more throttle given, the higher the RPM sound!
The Version 4.1 module weighs in at only 3.7oz with the TT-25 transducer. Most planes of about 1200mm or larger will haul it. It is designed to work on a 3S to 8S Lipo battery pack. Depending on the sound file, the actual output has been measured over 97db on a single speaker, up to 108db on a single TT-25!
The module itself is the whole unit, not just the sound card. References to "module" refers to the sound card, amplifier, and speaker, all in one whole modular unit. That is what makes this unit different from others. It will be sold as a whole unit, Plug and Play, you may say. No soldering, wiring or trying to figure out diagrams. Simply connect your battery to the unit via a Y cable, connect to a Y cable going to your RX or an empty channel mixed on your RX, and you are up and playing real engine sounds on your RC Airplane or ground vehicle!
What other things set this module apart from others? It is smaller, and lighter, built for use in smaller aircraft. The whole module fits nicely in aircraft of about a 1400mm wingspan. The integrated unit weighs in about 6oz. Some modifications may be required to make it fit in your plane.
1100mm-1350mm Wingspan: 1 V4.1 Base Unit
1350mm-1650mm Wingspan: 1 V4.1 Base Unit plus additional TT-25 or Max2-SPP
1650mm + Wingspan: 1 V4.1 Base Unit, Additional Amplifier, 3 additional TT-25s, or Max2SPL
Car/Truck down to 1/12 scale: 1 * V4.1 Base Unit with optional second TT-25 or Max2SPL
For greater sound quality add additional - TT-25 Transducer
Increase low bass tones - Bass Transducer
• Plug and play, no soldering required
• 3S to 8S Lipo Compatible
• Push Button Ease of Use
• Only 3.7oz. with TT-25
• 6 Main engine sounds
• Optional plug in sound chip expansions available separately
• Optional 6 LED set for realistic machine gun effect available separately
• Full installation instructions included
Weight: 3.7oz (Base Unit and TT-25)
Input Voltage: 11.1~29.6V 3~8S
Input Plug: JST
11.1~29.6V 3~8S LiPoly Input Battery
Sound chip with 6 sounds including Lycoming, Merlin, Continental, Turbine, P&W Double Wasp, and Daimler Benz 601.
*COSTOS DE ENVIO:
Usted puede recojer su producto en Nuestras Oficinas SIN COSTO alguno, o bien puede seleccionar cualquiera de las siguientes opciones :
|Estafeta Zona Metropolitana||32 m.n.||9 m.n.|
|Redpack Zona Metropolitana||32 m.n.||9 m.n.|
|Estafeta Interior de la Republica||38 m.n.||9 m.n.|
|Redpack Interior de la Republica||38 m.n.||9 m.n.|
|Extra Urgente (DHL-FEDEX-UPS Internacional *aprox 4-6 Dias Hab.)||144 m.n.||45 m.n.|
Nota al calce... |
El nombre Comercial MrRC® asi como tambien sus Logotipos son marcas comerciales registradas que pertenecen a su respectivos propietarios MrRC Corporation y sus filiales.
El uso publicitario de una marca ajena por un tercero, se admite siempre y cuando dicho uso no afecte al fin distintivo de la marca utilizada y, no se aprecie un riesgo de confusion y aprovechamiento de la reputacion generada. La Doctrina y Jurisprudencia comunitaria de la Organizacion Mundial de la Propiedad Intelectual OMPI han establecido una serie de requisitos para la legal utilizacion de una marca ajena en publicidad comparativa.